refactor(build): Add Maven wrapper.

Change-Id: I1859d0edf1576f18564e8d2c2e0afa2ebfd04d01
diff --git a/.mvn/wrapper/maven-wrapper.jar b/.mvn/wrapper/maven-wrapper.jar
new file mode 100644
index 0000000..cb28b0e
--- /dev/null
+++ b/.mvn/wrapper/maven-wrapper.jar
Binary files differ
diff --git a/.mvn/wrapper/maven-wrapper.properties b/.mvn/wrapper/maven-wrapper.properties
new file mode 100644
index 0000000..7d02699
--- /dev/null
+++ b/.mvn/wrapper/maven-wrapper.properties
@@ -0,0 +1,18 @@
+# Licensed to the Apache Software Foundation (ASF) under one
+# or more contributor license agreements.  See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership.  The ASF licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License.  You may obtain a copy of the License at
+#
+#   http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing,
+# software distributed under the License is distributed on an
+# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+# KIND, either express or implied.  See the License for the
+# specific language governing permissions and limitations
+# under the License.
+distributionUrl=https://repo.maven.apache.org/maven2/org/apache/maven/apache-maven/3.8.7/apache-maven-3.8.7-bin.zip
+wrapperUrl=https://repo.maven.apache.org/maven2/org/apache/maven/wrapper/maven-wrapper/3.2.0/maven-wrapper-3.2.0.jar
diff --git a/mvnw b/mvnw
new file mode 100755
index 0000000..8d937f4
--- /dev/null
+++ b/mvnw
@@ -0,0 +1,308 @@
+#!/bin/sh
+# ----------------------------------------------------------------------------
+# Licensed to the Apache Software Foundation (ASF) under one
+# or more contributor license agreements.  See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership.  The ASF licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License.  You may obtain a copy of the License at
+#
+#    http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing,
+# software distributed under the License is distributed on an
+# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+# KIND, either express or implied.  See the License for the
+# specific language governing permissions and limitations
+# under the License.
+# ----------------------------------------------------------------------------
+
+# ----------------------------------------------------------------------------
+# Apache Maven Wrapper startup batch script, version 3.2.0
+#
+# Required ENV vars:
+# ------------------
+#   JAVA_HOME - location of a JDK home dir
+#
+# Optional ENV vars
+# -----------------
+#   MAVEN_OPTS - parameters passed to the Java VM when running Maven
+#     e.g. to debug Maven itself, use
+#       set MAVEN_OPTS=-Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=y,address=8000
+#   MAVEN_SKIP_RC - flag to disable loading of mavenrc files
+# ----------------------------------------------------------------------------
+
+if [ -z "$MAVEN_SKIP_RC" ] ; then
+
+  if [ -f /usr/local/etc/mavenrc ] ; then
+    . /usr/local/etc/mavenrc
+  fi
+
+  if [ -f /etc/mavenrc ] ; then
+    . /etc/mavenrc
+  fi
+
+  if [ -f "$HOME/.mavenrc" ] ; then
+    . "$HOME/.mavenrc"
+  fi
+
+fi
+
+# OS specific support.  $var _must_ be set to either true or false.
+cygwin=false;
+darwin=false;
+mingw=false
+case "$(uname)" in
+  CYGWIN*) cygwin=true ;;
+  MINGW*) mingw=true;;
+  Darwin*) darwin=true
+    # Use /usr/libexec/java_home if available, otherwise fall back to /Library/Java/Home
+    # See https://developer.apple.com/library/mac/qa/qa1170/_index.html
+    if [ -z "$JAVA_HOME" ]; then
+      if [ -x "/usr/libexec/java_home" ]; then
+        JAVA_HOME="$(/usr/libexec/java_home)"; export JAVA_HOME
+      else
+        JAVA_HOME="/Library/Java/Home"; export JAVA_HOME
+      fi
+    fi
+    ;;
+esac
+
+if [ -z "$JAVA_HOME" ] ; then
+  if [ -r /etc/gentoo-release ] ; then
+    JAVA_HOME=$(java-config --jre-home)
+  fi
+fi
+
+# For Cygwin, ensure paths are in UNIX format before anything is touched
+if $cygwin ; then
+  [ -n "$JAVA_HOME" ] &&
+    JAVA_HOME=$(cygpath --unix "$JAVA_HOME")
+  [ -n "$CLASSPATH" ] &&
+    CLASSPATH=$(cygpath --path --unix "$CLASSPATH")
+fi
+
+# For Mingw, ensure paths are in UNIX format before anything is touched
+if $mingw ; then
+  [ -n "$JAVA_HOME" ] && [ -d "$JAVA_HOME" ] &&
+    JAVA_HOME="$(cd "$JAVA_HOME" || (echo "cannot cd into $JAVA_HOME."; exit 1); pwd)"
+fi
+
+if [ -z "$JAVA_HOME" ]; then
+  javaExecutable="$(which javac)"
+  if [ -n "$javaExecutable" ] && ! [ "$(expr "\"$javaExecutable\"" : '\([^ ]*\)')" = "no" ]; then
+    # readlink(1) is not available as standard on Solaris 10.
+    readLink=$(which readlink)
+    if [ ! "$(expr "$readLink" : '\([^ ]*\)')" = "no" ]; then
+      if $darwin ; then
+        javaHome="$(dirname "\"$javaExecutable\"")"
+        javaExecutable="$(cd "\"$javaHome\"" && pwd -P)/javac"
+      else
+        javaExecutable="$(readlink -f "\"$javaExecutable\"")"
+      fi
+      javaHome="$(dirname "\"$javaExecutable\"")"
+      javaHome=$(expr "$javaHome" : '\(.*\)/bin')
+      JAVA_HOME="$javaHome"
+      export JAVA_HOME
+    fi
+  fi
+fi
+
+if [ -z "$JAVACMD" ] ; then
+  if [ -n "$JAVA_HOME"  ] ; then
+    if [ -x "$JAVA_HOME/jre/sh/java" ] ; then
+      # IBM's JDK on AIX uses strange locations for the executables
+      JAVACMD="$JAVA_HOME/jre/sh/java"
+    else
+      JAVACMD="$JAVA_HOME/bin/java"
+    fi
+  else
+    JAVACMD="$(\unset -f command 2>/dev/null; \command -v java)"
+  fi
+fi
+
+if [ ! -x "$JAVACMD" ] ; then
+  echo "Error: JAVA_HOME is not defined correctly." >&2
+  echo "  We cannot execute $JAVACMD" >&2
+  exit 1
+fi
+
+if [ -z "$JAVA_HOME" ] ; then
+  echo "Warning: JAVA_HOME environment variable is not set."
+fi
+
+# traverses directory structure from process work directory to filesystem root
+# first directory with .mvn subdirectory is considered project base directory
+find_maven_basedir() {
+  if [ -z "$1" ]
+  then
+    echo "Path not specified to find_maven_basedir"
+    return 1
+  fi
+
+  basedir="$1"
+  wdir="$1"
+  while [ "$wdir" != '/' ] ; do
+    if [ -d "$wdir"/.mvn ] ; then
+      basedir=$wdir
+      break
+    fi
+    # workaround for JBEAP-8937 (on Solaris 10/Sparc)
+    if [ -d "${wdir}" ]; then
+      wdir=$(cd "$wdir/.." || exit 1; pwd)
+    fi
+    # end of workaround
+  done
+  printf '%s' "$(cd "$basedir" || exit 1; pwd)"
+}
+
+# concatenates all lines of a file
+concat_lines() {
+  if [ -f "$1" ]; then
+    # Remove \r in case we run on Windows within Git Bash
+    # and check out the repository with auto CRLF management
+    # enabled. Otherwise, we may read lines that are delimited with
+    # \r\n and produce $'-Xarg\r' rather than -Xarg due to word
+    # splitting rules.
+    tr -s '\r\n' ' ' < "$1"
+  fi
+}
+
+log() {
+  if [ "$MVNW_VERBOSE" = true ]; then
+    printf '%s\n' "$1"
+  fi
+}
+
+BASE_DIR=$(find_maven_basedir "$(dirname "$0")")
+if [ -z "$BASE_DIR" ]; then
+  exit 1;
+fi
+
+MAVEN_PROJECTBASEDIR=${MAVEN_BASEDIR:-"$BASE_DIR"}; export MAVEN_PROJECTBASEDIR
+log "$MAVEN_PROJECTBASEDIR"
+
+##########################################################################################
+# Extension to allow automatically downloading the maven-wrapper.jar from Maven-central
+# This allows using the maven wrapper in projects that prohibit checking in binary data.
+##########################################################################################
+wrapperJarPath="$MAVEN_PROJECTBASEDIR/.mvn/wrapper/maven-wrapper.jar"
+if [ -r "$wrapperJarPath" ]; then
+    log "Found $wrapperJarPath"
+else
+    log "Couldn't find $wrapperJarPath, downloading it ..."
+
+    if [ -n "$MVNW_REPOURL" ]; then
+      wrapperUrl="$MVNW_REPOURL/org/apache/maven/wrapper/maven-wrapper/3.2.0/maven-wrapper-3.2.0.jar"
+    else
+      wrapperUrl="https://repo.maven.apache.org/maven2/org/apache/maven/wrapper/maven-wrapper/3.2.0/maven-wrapper-3.2.0.jar"
+    fi
+    while IFS="=" read -r key value; do
+      # Remove '\r' from value to allow usage on windows as IFS does not consider '\r' as a separator ( considers space, tab, new line ('\n'), and custom '=' )
+      safeValue=$(echo "$value" | tr -d '\r')
+      case "$key" in (wrapperUrl) wrapperUrl="$safeValue"; break ;;
+      esac
+    done < "$MAVEN_PROJECTBASEDIR/.mvn/wrapper/maven-wrapper.properties"
+    log "Downloading from: $wrapperUrl"
+
+    if $cygwin; then
+      wrapperJarPath=$(cygpath --path --windows "$wrapperJarPath")
+    fi
+
+    if command -v wget > /dev/null; then
+        log "Found wget ... using wget"
+        [ "$MVNW_VERBOSE" = true ] && QUIET="" || QUIET="--quiet"
+        if [ -z "$MVNW_USERNAME" ] || [ -z "$MVNW_PASSWORD" ]; then
+            wget $QUIET "$wrapperUrl" -O "$wrapperJarPath" || rm -f "$wrapperJarPath"
+        else
+            wget $QUIET --http-user="$MVNW_USERNAME" --http-password="$MVNW_PASSWORD" "$wrapperUrl" -O "$wrapperJarPath" || rm -f "$wrapperJarPath"
+        fi
+    elif command -v curl > /dev/null; then
+        log "Found curl ... using curl"
+        [ "$MVNW_VERBOSE" = true ] && QUIET="" || QUIET="--silent"
+        if [ -z "$MVNW_USERNAME" ] || [ -z "$MVNW_PASSWORD" ]; then
+            curl $QUIET -o "$wrapperJarPath" "$wrapperUrl" -f -L || rm -f "$wrapperJarPath"
+        else
+            curl $QUIET --user "$MVNW_USERNAME:$MVNW_PASSWORD" -o "$wrapperJarPath" "$wrapperUrl" -f -L || rm -f "$wrapperJarPath"
+        fi
+    else
+        log "Falling back to using Java to download"
+        javaSource="$MAVEN_PROJECTBASEDIR/.mvn/wrapper/MavenWrapperDownloader.java"
+        javaClass="$MAVEN_PROJECTBASEDIR/.mvn/wrapper/MavenWrapperDownloader.class"
+        # For Cygwin, switch paths to Windows format before running javac
+        if $cygwin; then
+          javaSource=$(cygpath --path --windows "$javaSource")
+          javaClass=$(cygpath --path --windows "$javaClass")
+        fi
+        if [ -e "$javaSource" ]; then
+            if [ ! -e "$javaClass" ]; then
+                log " - Compiling MavenWrapperDownloader.java ..."
+                ("$JAVA_HOME/bin/javac" "$javaSource")
+            fi
+            if [ -e "$javaClass" ]; then
+                log " - Running MavenWrapperDownloader.java ..."
+                ("$JAVA_HOME/bin/java" -cp .mvn/wrapper MavenWrapperDownloader "$wrapperUrl" "$wrapperJarPath") || rm -f "$wrapperJarPath"
+            fi
+        fi
+    fi
+fi
+##########################################################################################
+# End of extension
+##########################################################################################
+
+# If specified, validate the SHA-256 sum of the Maven wrapper jar file
+wrapperSha256Sum=""
+while IFS="=" read -r key value; do
+  case "$key" in (wrapperSha256Sum) wrapperSha256Sum=$value; break ;;
+  esac
+done < "$MAVEN_PROJECTBASEDIR/.mvn/wrapper/maven-wrapper.properties"
+if [ -n "$wrapperSha256Sum" ]; then
+  wrapperSha256Result=false
+  if command -v sha256sum > /dev/null; then
+    if echo "$wrapperSha256Sum  $wrapperJarPath" | sha256sum -c > /dev/null 2>&1; then
+      wrapperSha256Result=true
+    fi
+  elif command -v shasum > /dev/null; then
+    if echo "$wrapperSha256Sum  $wrapperJarPath" | shasum -a 256 -c > /dev/null 2>&1; then
+      wrapperSha256Result=true
+    fi
+  else
+    echo "Checksum validation was requested but neither 'sha256sum' or 'shasum' are available."
+    echo "Please install either command, or disable validation by removing 'wrapperSha256Sum' from your maven-wrapper.properties."
+    exit 1
+  fi
+  if [ $wrapperSha256Result = false ]; then
+    echo "Error: Failed to validate Maven wrapper SHA-256, your Maven wrapper might be compromised." >&2
+    echo "Investigate or delete $wrapperJarPath to attempt a clean download." >&2
+    echo "If you updated your Maven version, you need to update the specified wrapperSha256Sum property." >&2
+    exit 1
+  fi
+fi
+
+MAVEN_OPTS="$(concat_lines "$MAVEN_PROJECTBASEDIR/.mvn/jvm.config") $MAVEN_OPTS"
+
+# For Cygwin, switch paths to Windows format before running java
+if $cygwin; then
+  [ -n "$JAVA_HOME" ] &&
+    JAVA_HOME=$(cygpath --path --windows "$JAVA_HOME")
+  [ -n "$CLASSPATH" ] &&
+    CLASSPATH=$(cygpath --path --windows "$CLASSPATH")
+  [ -n "$MAVEN_PROJECTBASEDIR" ] &&
+    MAVEN_PROJECTBASEDIR=$(cygpath --path --windows "$MAVEN_PROJECTBASEDIR")
+fi
+
+# Provide a "standardized" way to retrieve the CLI args that will
+# work with both Windows and non-Windows executions.
+MAVEN_CMD_LINE_ARGS="$MAVEN_CONFIG $*"
+export MAVEN_CMD_LINE_ARGS
+
+WRAPPER_LAUNCHER=org.apache.maven.wrapper.MavenWrapperMain
+
+# shellcheck disable=SC2086 # safe args
+exec "$JAVACMD" \
+  $MAVEN_OPTS \
+  $MAVEN_DEBUG_OPTS \
+  -classpath "$MAVEN_PROJECTBASEDIR/.mvn/wrapper/maven-wrapper.jar" \
+  "-Dmaven.multiModuleProjectDirectory=${MAVEN_PROJECTBASEDIR}" \
+  ${WRAPPER_LAUNCHER} $MAVEN_CONFIG "$@"
diff --git a/mvnw.cmd b/mvnw.cmd
new file mode 100644
index 0000000..f80fbad
--- /dev/null
+++ b/mvnw.cmd
@@ -0,0 +1,205 @@
+@REM ----------------------------------------------------------------------------

+@REM Licensed to the Apache Software Foundation (ASF) under one

+@REM or more contributor license agreements.  See the NOTICE file

+@REM distributed with this work for additional information

+@REM regarding copyright ownership.  The ASF licenses this file

+@REM to you under the Apache License, Version 2.0 (the

+@REM "License"); you may not use this file except in compliance

+@REM with the License.  You may obtain a copy of the License at

+@REM

+@REM    http://www.apache.org/licenses/LICENSE-2.0

+@REM

+@REM Unless required by applicable law or agreed to in writing,

+@REM software distributed under the License is distributed on an

+@REM "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY

+@REM KIND, either express or implied.  See the License for the

+@REM specific language governing permissions and limitations

+@REM under the License.

+@REM ----------------------------------------------------------------------------

+

+@REM ----------------------------------------------------------------------------

+@REM Apache Maven Wrapper startup batch script, version 3.2.0

+@REM

+@REM Required ENV vars:

+@REM JAVA_HOME - location of a JDK home dir

+@REM

+@REM Optional ENV vars

+@REM MAVEN_BATCH_ECHO - set to 'on' to enable the echoing of the batch commands

+@REM MAVEN_BATCH_PAUSE - set to 'on' to wait for a keystroke before ending

+@REM MAVEN_OPTS - parameters passed to the Java VM when running Maven

+@REM     e.g. to debug Maven itself, use

+@REM set MAVEN_OPTS=-Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=y,address=8000

+@REM MAVEN_SKIP_RC - flag to disable loading of mavenrc files

+@REM ----------------------------------------------------------------------------

+

+@REM Begin all REM lines with '@' in case MAVEN_BATCH_ECHO is 'on'

+@echo off

+@REM set title of command window

+title %0

+@REM enable echoing by setting MAVEN_BATCH_ECHO to 'on'

+@if "%MAVEN_BATCH_ECHO%" == "on"  echo %MAVEN_BATCH_ECHO%

+

+@REM set %HOME% to equivalent of $HOME

+if "%HOME%" == "" (set "HOME=%HOMEDRIVE%%HOMEPATH%")

+

+@REM Execute a user defined script before this one

+if not "%MAVEN_SKIP_RC%" == "" goto skipRcPre

+@REM check for pre script, once with legacy .bat ending and once with .cmd ending

+if exist "%USERPROFILE%\mavenrc_pre.bat" call "%USERPROFILE%\mavenrc_pre.bat" %*

+if exist "%USERPROFILE%\mavenrc_pre.cmd" call "%USERPROFILE%\mavenrc_pre.cmd" %*

+:skipRcPre

+

+@setlocal

+

+set ERROR_CODE=0

+

+@REM To isolate internal variables from possible post scripts, we use another setlocal

+@setlocal

+

+@REM ==== START VALIDATION ====

+if not "%JAVA_HOME%" == "" goto OkJHome

+

+echo.

+echo Error: JAVA_HOME not found in your environment. >&2

+echo Please set the JAVA_HOME variable in your environment to match the >&2

+echo location of your Java installation. >&2

+echo.

+goto error

+

+:OkJHome

+if exist "%JAVA_HOME%\bin\java.exe" goto init

+

+echo.

+echo Error: JAVA_HOME is set to an invalid directory. >&2

+echo JAVA_HOME = "%JAVA_HOME%" >&2

+echo Please set the JAVA_HOME variable in your environment to match the >&2

+echo location of your Java installation. >&2

+echo.

+goto error

+

+@REM ==== END VALIDATION ====

+

+:init

+

+@REM Find the project base dir, i.e. the directory that contains the folder ".mvn".

+@REM Fallback to current working directory if not found.

+

+set MAVEN_PROJECTBASEDIR=%MAVEN_BASEDIR%

+IF NOT "%MAVEN_PROJECTBASEDIR%"=="" goto endDetectBaseDir

+

+set EXEC_DIR=%CD%

+set WDIR=%EXEC_DIR%

+:findBaseDir

+IF EXIST "%WDIR%"\.mvn goto baseDirFound

+cd ..

+IF "%WDIR%"=="%CD%" goto baseDirNotFound

+set WDIR=%CD%

+goto findBaseDir

+

+:baseDirFound

+set MAVEN_PROJECTBASEDIR=%WDIR%

+cd "%EXEC_DIR%"

+goto endDetectBaseDir

+

+:baseDirNotFound

+set MAVEN_PROJECTBASEDIR=%EXEC_DIR%

+cd "%EXEC_DIR%"

+

+:endDetectBaseDir

+

+IF NOT EXIST "%MAVEN_PROJECTBASEDIR%\.mvn\jvm.config" goto endReadAdditionalConfig

+

+@setlocal EnableExtensions EnableDelayedExpansion

+for /F "usebackq delims=" %%a in ("%MAVEN_PROJECTBASEDIR%\.mvn\jvm.config") do set JVM_CONFIG_MAVEN_PROPS=!JVM_CONFIG_MAVEN_PROPS! %%a

+@endlocal & set JVM_CONFIG_MAVEN_PROPS=%JVM_CONFIG_MAVEN_PROPS%

+

+:endReadAdditionalConfig

+

+SET MAVEN_JAVA_EXE="%JAVA_HOME%\bin\java.exe"

+set WRAPPER_JAR="%MAVEN_PROJECTBASEDIR%\.mvn\wrapper\maven-wrapper.jar"

+set WRAPPER_LAUNCHER=org.apache.maven.wrapper.MavenWrapperMain

+

+set WRAPPER_URL="https://repo.maven.apache.org/maven2/org/apache/maven/wrapper/maven-wrapper/3.2.0/maven-wrapper-3.2.0.jar"

+

+FOR /F "usebackq tokens=1,2 delims==" %%A IN ("%MAVEN_PROJECTBASEDIR%\.mvn\wrapper\maven-wrapper.properties") DO (

+    IF "%%A"=="wrapperUrl" SET WRAPPER_URL=%%B

+)

+

+@REM Extension to allow automatically downloading the maven-wrapper.jar from Maven-central

+@REM This allows using the maven wrapper in projects that prohibit checking in binary data.

+if exist %WRAPPER_JAR% (

+    if "%MVNW_VERBOSE%" == "true" (

+        echo Found %WRAPPER_JAR%

+    )

+) else (

+    if not "%MVNW_REPOURL%" == "" (

+        SET WRAPPER_URL="%MVNW_REPOURL%/org/apache/maven/wrapper/maven-wrapper/3.2.0/maven-wrapper-3.2.0.jar"

+    )

+    if "%MVNW_VERBOSE%" == "true" (

+        echo Couldn't find %WRAPPER_JAR%, downloading it ...

+        echo Downloading from: %WRAPPER_URL%

+    )

+

+    powershell -Command "&{"^

+		"$webclient = new-object System.Net.WebClient;"^

+		"if (-not ([string]::IsNullOrEmpty('%MVNW_USERNAME%') -and [string]::IsNullOrEmpty('%MVNW_PASSWORD%'))) {"^

+		"$webclient.Credentials = new-object System.Net.NetworkCredential('%MVNW_USERNAME%', '%MVNW_PASSWORD%');"^

+		"}"^

+		"[Net.ServicePointManager]::SecurityProtocol = [Net.SecurityProtocolType]::Tls12; $webclient.DownloadFile('%WRAPPER_URL%', '%WRAPPER_JAR%')"^

+		"}"

+    if "%MVNW_VERBOSE%" == "true" (

+        echo Finished downloading %WRAPPER_JAR%

+    )

+)

+@REM End of extension

+

+@REM If specified, validate the SHA-256 sum of the Maven wrapper jar file

+SET WRAPPER_SHA_256_SUM=""

+FOR /F "usebackq tokens=1,2 delims==" %%A IN ("%MAVEN_PROJECTBASEDIR%\.mvn\wrapper\maven-wrapper.properties") DO (

+    IF "%%A"=="wrapperSha256Sum" SET WRAPPER_SHA_256_SUM=%%B

+)

+IF NOT %WRAPPER_SHA_256_SUM%=="" (

+    powershell -Command "&{"^

+       "$hash = (Get-FileHash \"%WRAPPER_JAR%\" -Algorithm SHA256).Hash.ToLower();"^

+       "If('%WRAPPER_SHA_256_SUM%' -ne $hash){"^

+       "  Write-Output 'Error: Failed to validate Maven wrapper SHA-256, your Maven wrapper might be compromised.';"^

+       "  Write-Output 'Investigate or delete %WRAPPER_JAR% to attempt a clean download.';"^

+       "  Write-Output 'If you updated your Maven version, you need to update the specified wrapperSha256Sum property.';"^

+       "  exit 1;"^

+       "}"^

+       "}"

+    if ERRORLEVEL 1 goto error

+)

+

+@REM Provide a "standardized" way to retrieve the CLI args that will

+@REM work with both Windows and non-Windows executions.

+set MAVEN_CMD_LINE_ARGS=%*

+

+%MAVEN_JAVA_EXE% ^

+  %JVM_CONFIG_MAVEN_PROPS% ^

+  %MAVEN_OPTS% ^

+  %MAVEN_DEBUG_OPTS% ^

+  -classpath %WRAPPER_JAR% ^

+  "-Dmaven.multiModuleProjectDirectory=%MAVEN_PROJECTBASEDIR%" ^

+  %WRAPPER_LAUNCHER% %MAVEN_CONFIG% %*

+if ERRORLEVEL 1 goto error

+goto end

+

+:error

+set ERROR_CODE=1

+

+:end

+@endlocal & set ERROR_CODE=%ERROR_CODE%

+

+if not "%MAVEN_SKIP_RC%"=="" goto skipRcPost

+@REM check for post script, once with legacy .bat ending and once with .cmd ending

+if exist "%USERPROFILE%\mavenrc_post.bat" call "%USERPROFILE%\mavenrc_post.bat"

+if exist "%USERPROFILE%\mavenrc_post.cmd" call "%USERPROFILE%\mavenrc_post.cmd"

+:skipRcPost

+

+@REM pause the script if MAVEN_BATCH_PAUSE is set to 'on'

+if "%MAVEN_BATCH_PAUSE%"=="on" pause

+

+if "%MAVEN_TERMINATE_CMD%"=="on" exit %ERROR_CODE%

+

+cmd /C exit /B %ERROR_CODE%